MYTH Style Number Construction Tile Type Tile Size TILE & STONE TG20C ceramic floor tile 12" × 24" TG21C ceramic floor tile 20" × 20" TG22C ceramic floor tile 12" × 12" TG32C ceramic bullnose 2.75" × 12" TG31C ceramic mosaic 12" × 12" × 2" Technical Wear Rating Group Break Strength Water Absorption DCOF Shade Variation 4 180 lbs 6-10% 0.49 V2 4 180 lbs 6-10% 0.49 V2 4 180 lbs 6-10% 0.49 V2 4 180 lbs 6-10% 0.49 V2 4 180 lbs 6-10% 0.49 V2 A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - For additional information, refer to Factors to Consider. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 200 Beige 500 Gris TG31C mosaic 200 Beige 500 Gris Benefits Back to Table of Contents 30